Better Homes and Gardens Magazine

Today, “Better Homes and Gardens” magazine is one of the most popular home magazines sold. For years it has been showing people everything from how to get clutter out of a house to which plants can be grown in doors. It also has shown countless recipes and quick-fix meals. Various crafts have also been show cased.

History

This magazine actually started off under the title of “Fruit, Garden and Home” in 1922, and was published by the Meredith Corporation. This was a family and home service magazine. Then in 1924 the name was changed to “Better Homes and Gardens”. When it first hit the newsstands one could buy it for $.10 a copy. The price for a subscription for a year was only $.35

Several years later in 1930 to be exact, a cookbook under the same name of the magazine was published. Building Ideas was published as a special interest publication under “Better Homes and Gardens” in 1937.

Then in 1978 a real estate service was launched under the Better Homes and Gardens name. Also the Australian version of the magazine was published. A quilting magazine under the Better Homes and Gardens name came out in 1993 offering even more information for people on home activities.

Circulation

The latest circulation figure for this magazine is a whopping 7,688,000 people. Now that is quite a following!

Content

Since early in the publication of the magazine the content has been based on the home and its garden areas. Included in the topics for the home have even been craft ideas people can make on their own. Also various ideas on home d├ęcor have been included to help one decorate their house. Tips on planting seeds and taking care of plants are even included in one current issue of this magazine.

From a 1940′s information on how easy ironing was then to January 2010 article on how to cut down the clutter in the house among other things, this magazine strives to be of help to people. This magazine has had recipes on various items from cookies to bread puddings.

The recipes are all kitchen tested to make sure they work. This magazine has offered even a food guide in the past. It is quite a job to plan meals for a family and magazines like this one make the job much easier.

In the July 1963 issue had an article “How to Stay Young and Look Great”. It seems like the public does not change in what they need to read since many articles are written today on that same subject. In 1965 an issue came out showcasing which campers were the latest on the market.

MoS2 Low Friction Coatings – Not Just For The Aviation Industry Anymore

MoS2 low friction coatings (also known as molybdenum disulfide, also spelled, disulphide) are regarded the most widely used form of solid film lubrication today. What makes them unique (with the other dichalcogenides) is the weak atomic interaction (Van der Waals) of the sulfide anions, while covalent bonds within molybdenum are strong.Thus, lubrication relies on slippage along the sulfur atoms. All the properties of the lamella structure are intrinsic. No external form of moisture is required. In fact, best performance from MoS2 low friction coatings is attained in the absence of water vapor, which are prone to surface adsorption. This makes them ideal under vacuum.There are a number of methods to apply MoS2 low friction coatings, including a simple rubbing or burnishing, air-spraying resin-bonded or inorganically bonded coatings, and more recently by sputtering through physical vapor deposition (PVD).Thickness will vary, depending on form of MoS2 low friction coatings, but typically ranges between 5 to 15 micrometer. Sputtering techniques can produce thin films of 0.2 micrometer. While plasma sprays will result in higher builds, beginning at 0.003 inch or more.Friction coefficient less than 0.05 is attainable, but will also vary with humidity and sliding conditions. Tests show friction decreases with increasing vacuum strength. Friction also lowers with higher load, faster surface speed, or both. In fact, MoS2 low friction coatings are superior to both graphite and tungsten disulfide (WS2). Friction with MoS2 low friction coatings is independent of particle size, though the larger particles can carry more load.Dry lubrication for MoS2 low friction coatings remains superior at higher temperatures, with oxidation rates remaining relatively low at temperatures up to 600 degrees Fahrenheit. And in dry, oxygen-free atmospheres, lubricating performance, even with oxidation products, is stable to 1300 degrees Fahrenheit.Higher air flow can affect oxidation kinetic rates in atmosphere. Molybdenum oxide products (MoO3) and sulfur dioxide. Since MoO3 alone offers dry lubrication, based on its relative softness, molybdenum disulfide coating are ideal in higher temperature environments. At higher temperatures, though, they are better suited under vacuum. In atmosphere, they are prone to water adsorption from air based on their hygroscopic properties.As with the other dry film lubricants, while differences may prove negligible, you will have to determine which is better for you: longer wear life or better performance, using MoS2 low friction coatings. Generally, friction will be slightly higher by coating both surfaces, rather than coating one surface only. But wear life will increase coating both surfaces.Friction can be good in so many areas of life. Without it we could not easily stop and start our motion, or change direction. But in moving machinery, friction causes considerable loss of energy, poorer performance, not to mention limiting wear life.As with many non-lubricated systems, the static coefficient of friction is higher than the dynamic coefficient of friction. The resultant motion is often referred to as ‘stick-slip’. Basically, the two surfaces stick together until the elastic energy within the system has accumulated to some threshold, where a sudden, forward slip takes place. Under magnification, it’s apparent the union of two surfaces is often limited to intimate contact only at the tips of a few of the asperities (small scale, surface irregularities). At these point areas, pressures relating to contact may be near the hardness of the softer material. Thus, plastic deformation occurs on some localized scale. This is known as cold welding. Where bonded junctions are formed between two materials.For lubrication to occur, these bonds, this adhesive component of friction, must be broken. And this is where products like MoS2 low friction coatings serve well.So, where are these products used today? Consider aerospace, automotive, marine and electronic, for starters. There, you’ll find MoS2 low friction coatings, again and again.

Ontario’s Wine Industry – Harvesting the Benefits of SR&ED

How wonderful it is to proudly browse the wide selection of Ontario’s wines at your local LCBO. Knowing that your own winery is both a driving force in the Canadian economy and an innovator of the local wine industry can certainly be rewarding, both personally and professionally.From challenges to opportunitiesQuite often the goal of a grape grower to produce a consistent, high-quality brand of wine is met with many unexpected challenges. With the erratic situation of the Canadian economy following the recession, wine makers of Ontario struggle to produce at the risk of manufacturing downsizing. In addition to economic factors, the wine industry of Ontario is faced with a higher stringency under Vintners Quality Alliance (VQA) regulations, and the push from Wine Council of Ontario (WCO) to raise industry standards by participating in programs like Sustainable Winemaking Ontario.For the individual winery of Ontario, keeping up with competition means continuously utilizing new technologies and finding innovative ways to provide a premium product, despite such challenges. Simply put, this boils down to having the necessary financial opportunities become available to maintain a healthy competition. Are these opportunities available to the wine industry of Ontario? Yes – SR&ED is the answer!The SR&ED programThe SR&ED program (Scientific Research & Experimental Development) aims to reimburse companies for their experimental development expenses. For over 20 years and with about $4 billion a year in funding, it remains the largest single source of federal funding for R&D in Canada. The goal is to make creativity and innovation affordable in the Canadian business environment and foster future development.The program is highly relevant to businesses who are naturally involved in shop-floor
experimentation. R&D projects that qualify under the program include (1) work undertaken for the purpose of achieving technological advancement and/or (2) creating new, or improving existing materials, devices, products or processes. The actual refund amount depends on proper identification and qualification of eligible expenditures.Wineries in Ontario serve as ideal candidates for such funding. Typical SR&ED eligible activities that apply to the wine industry include:Developing new wines
Altering soil chemistry
Handling and harvesting technology
Improved bottling techniques
Altering practice as result of the weather
Many more…
Wineries and growers may be regularly overcoming such obstacles in daily operation. Your innovative solutions to these problems may very well qualify you for some SR&ED funding. The program supports any attempts to improve your business operations, even if they do not prove successful.Which costs qualify?Working on new ideas takes time, wastes material and requires equipment modification. The SR&ED program allows retrieving these expenses:68% of wages and salaries of personnel directly involved in R&D
41% of sub-contractor expenses
22% of capital expenditures
The refund has no strings attached – as a winery owner you are free to spend it anyway you like – buy new equipment, attempt new projects, or give everyone a big bonus – the decision is yours!How we can help?Submitting a SR&ED claim is a fairly complex and time consuming process. It involves properly identifying eligible activities within your business, associating the appropriate costs to these projects and completing a highly technical report to support the claim.Using the extensive experience of a professional consultancy like ourselves, business owners have the opportunity to review their potential for qualification, and complete the application process in a few hours, and with no up-front costs. We get paid when you do!Discovering that your business is eligible for SR&ED funding makes a world of difference. The goal is to help your winery take potential technical risks that will eventually lead to significant improvements in your industry.